- 您現在的位置：買賣IC網 > PDF目錄363892 > W567S341 (WINBOND ELECTRONICS CORP) 8-CHANNEL SPEECH+MELODY PROCESSOR (BandDirectorTM Series) PDF資料下載
參數資料
| 型號： | W567S341 |
| 廠商： | WINBOND ELECTRONICS CORP |
| 元件分類： | 微控制器/微處理器 |
| 英文描述： | 8-CHANNEL SPEECH+MELODY PROCESSOR (BandDirectorTM Series) |
| 中文描述： | 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, QFP100 |
| 封裝： | LQFP-100 |
| 文件頁數： | 4/13頁 |
| 文件大小： | 284K |
| 代理商： | W567S341 |
W567SXXX
- 4 -
3. PIN DESCRIPTION
PIN NAME
RESETB
XIN
XOUT
I/O
In
In
Out
FUNCTION
IC reset input, low active.
32 KHz crystal oscillator with divider for time-keeping application
32 KHz crystal oscillator with divider for time-keeping application
Main-clock oscillation input. Only Ring type is used. Connect to GND via the
oscillation resistor.
General input port with pull-high selection. Each 2 input pins can be
programmed to generate interrupt request and used to release IC from
STOP mode.
IP0[3:0] are used as the input of ADC. IP0.0 is the input pin of channel 0
and IP0.3 is the input pin of channel 3, and so on.
General input/output pins. When used as output pin, it can be open–drain
or CMOS type and it can sink 8mA for high-current applications. When
used as input pin, there may have a pull-high option and generate interrupt
request to release IC from STOP mode.
When BP0[7] is used as output pin, it can be the IR transmission carrier for
IR applications.
General input/output pins. When used as output pin, it can be open–drain
or CMOS type. When used as input pin, there may have a pull-high option
and generate interrupt request to release IC from STOP mode.
When serial interface is enabled, BP1[6:4] are used as serial interface pins.
General input/output pins. When used as output pin, it can be open–drain
or CMOS type. When used as input pin, there may have a pull-high option
and generate interrupt request to release IC from STOP mode.
Reference-bottom voltage of ADC. Theoretically, the converted codes 0 ~
255 will be uniformly distributed between VRB and AVDD. Voltages below
VRB will be mapped to code 0.
Capacitor input for ADC.
Capacitor output for ADC.
ADC regulator output voltage.
Current type DAC speaker output 0.
Current type DAC speaker output 1.
Test input, internally pulled low. Do not connect during normal operation.
Positive power supply for
μ
P and peripherals.
Negative power supply for
μ
P and peripherals.
Positive power supply for oscillation.
Negative power supply for oscillation.
Positive power supply for ADC module.
Negative power supply for ADC module.
OSC
In
IP0[3:0] /
IP0[7:4]
In
BP0[7:0]
I/O
BP1[7:0]
I/O
BP2[7:0]
I/O
2
VRB
Out
2
CIN
2
COUT
2
AVDD
DAC0
DAC1
TEST
V
DD
V
SS
3
VDDOSC
3
VSSOSC
2
VDDA
2
VSSA
In
Out
Out
Out
Out
In
Power
Power
Power
Power
Power
Power
2
Only W567S301~S341 provides these pins for ADC application.
3
In order to get a stable oscillating frequency, W567S080~S341 provides these pins for power supply.
相關PDF資料 |
PDF描述 |
|---|---|
| W567SXXX | 8-CHANNEL SPEECH+MELODY PROCESSOR (BandDirectorTM Series) |
| W57EYW | T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP |
| W58-124-9069916 | QT-BNC Connector To Tooling Cross Reference |
| W58-124-9XX9XXX-1 | QT-BNC 75ohm PLUG OUTLINE DRAWING RBOCs (TELCOs) |
| W58100 | ROM-LESS ADPCM Voice Synthesizer(無ROM的自適應音ADPCM音合成器) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W567SXXX | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-CHANNEL SPEECH+MELODY PROCESSOR (BandDirectorTM Series) |
| W568 | 制造商:SLI EBT 功能描述:LAMP T3.1/4 MBC/MCC 24V 1.2W |
| W568-5 | 制造商:CML Innovative Technologies 功能描述:LAMP MBC/MCC T3.1/4 24V 1.2W 制造商:CML Innovative Technologies 功能描述:LAMP, MBC/MCC, T3.1/4, 24V, 1.2W 制造商:CML Innovative Technologies 功能描述:LAMP, INCANDESCENT, BA9S, T-3 1/4, 1.2W,; Supply Voltage:24V; Lamp Base Type:BA9s; Bulb Size:T-3 1/4; Power Rating:1.2W; MSCP:0.39; Average Bulb Life:5000h ;RoHS Compliant: Yes |
| W5696VC020 | 制造商:n/a 功能描述:Diode Puck |
| W56B | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:56 Lead Cerquad Non-Conductive Tie Bar |
發布緊急采購，3分鐘左右您將得到回復。