- 您現在的位置：買賣IC網 > PDF目錄363891 > W536060P (WINBOND ELECTRONICS CORP) VOICE & MELODY CONTROLLER PDF資料下載
參數資料
| 型號： | W536060P |
| 廠商： | WINBOND ELECTRONICS CORP |
| 元件分類： | 音頻合成 |
| 英文描述： | VOICE & MELODY CONTROLLER |
| 中文描述： | 60 SEC, SPEECH SYNTHESIZER |
| 封裝： | COB |
| 文件頁數： | 6/14頁 |
| 文件大?。?/td> | 596K |
| 代理商： | W536060P |
W536030P/060P/090P/120P
- 6 -
4. PAD DESCRIPTION
SYMBOL
I/O
FUNCTION
XIN/RXIN
I
Input pad for main clock oscillator. It can be connected to crystal when
crystal mode is selected (SCR0.2=1), otherwise connect a resistor to
VDD to generate main system clock while Ring mode is selected
(SCR0.2=0 and default). Oscillator can be enabled or stopped by set
SCR0.1 to 1 or clear to 0 separately. External capacitor connects to
start oscillation and get more accurate clock when crystal mode
XOUT
O
Output pad for oscillator which is connected to another crystal pad
when in crystal mode. External capacitor connects to start oscillation
when in crystal mode.
X32I/RSUB1
I
32.768 KHz crystal input pad or external resistor node 1
by mask
option
. External 15~20pF capacitor connects to start oscillation and
get more accurate clock when in crystal mode.
X32O/RSUB2
O
32.768 KHz crystal output pad or external resistor node 2
by mask
option.
External 15~20pF capacitor connects to start oscillation when
in crystal mode.
RA0 ~ RA3/TONE
(4)
I/O
General Input/Output port specified by PM1 register. If output mode is
selected, PM0 register bit 0 can be used to specify CMOS/NMOS
driving capability option. Initial state is input mode. RA3 may be uses
as TONE if bit 0 of MR0 special register is set to logic 1. An interrupt
source.
RB0 ~ RB3
(4)
I/O
General Input/Output port specified by PM2 register. If output mode is
selected, PM0 register bit 1 can be used to specify CMOS/NMOS
driving capability option. Initial state is input mode.
RC0 ~ RC3
I
4-bit schmitter input with internal pull high option specified by PM3
register bit 2. Each pad has an independent interrupt capability
specified by PEFL special register. Interrupt and STOP mode wake up
source. RC0 is also the external event counter source of Timer1.
RD0 ~ RD3
I
4-bit schmitter input port with internal pull high option specified by PM3
register bit 3. Each pad has an independent interrupt capability
specified by PEFH special register. Interrupt and STOP mode wake up
source.
RE0~RE3
(4)
O
Output port only. PM3 register bit 0 can be used to specify
CMOS/NMOS driving capability option.
RF0~RF3
(4)
O
Output port only. PM3 register bit 1 can be used to specify
CMOS/NMOS driving capability option.
Input port with internal pull high option specified by PM6 register bit 0.
(W536090P/W536120P only)
RG0 ~ RG3
I
RH0 ~ RH3
(4)
RES
O
Output port only. PM6 register bit 1 can be used to specify
CMOS/NMOS driving capability option. (W536090P/W536120P only)
I
System reset pad, active low with internal pull-high resistor.
相關PDF資料 |
PDF描述 |
|---|---|
| W536030T | VOICE/MELODY/LCD CONTROLLER |
| W536060T | VOICE/MELODY/LCD CONTROLLER |
| W536090T | VOICE/MELODY/LCD CONTROLLER |
| W536120T | VOICE/MELODY/LCD CONTROLLER |
| W536A031 | VOICE/MELODY/LCD CONTROLLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W536060T | 制造商:WINBOND 制造商全稱:Winbond 功能描述:VOICE/MELODY/LCD CONTROLLER |
| W536090A | 制造商:WINBOND 制造商全稱:Winbond 功能描述:VOICE/ MELODY / LCD CONTROLLER |
| W536090K | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:ViewTalkTM Family |
| W536090P | 制造商:WINBOND 制造商全稱:Winbond 功能描述:VOICE & MELODY CONTROLLER |
| W536090T | 制造商:WINBOND 制造商全稱:Winbond 功能描述:VOICE/MELODY/LCD CONTROLLER |
發布緊急采購，3分鐘左右您將得到回復。