
W536030T/060T/090T/120T
Publication Release Date: May 21, 2003
- 7 -
Revision A8
PAD Description, continued
SYMBOL
TEST
I/O
I
FUNCTION
Test pad. Active high with internal pull low resistor.
Connect resistor to V
DD
pad to generate speech or melody playing
clock source.
While speech or melody is active, PWM1/DAC is speaker direct driving
output or DAC output controlled by voice output file.
While speech or melody is active, PWM2 is another speaker direct
driving output.
External serial memory address write clock for voice extension
(W536120T only). The “Tri-sate serial bus”
mask option
can use tri-
sate WRP pad while external voice ROM is not available. Default that
mask option is disabled and fixes WRP pad state while external voice is
not enabled to get chip low power consumption.
External serial memory address read clock for voice extension.
(W536120T only). The pad state is same as WRP pad depended on
“Tri-sate serial bus”
mask option.
External serial memory data in/out for voice extension (W536120T
only). The pad state is same as WRP pad depended on “Tri-sate serial
bus”
mask option.
ROSC
I
PWM1/DAC
O
PWM2
O
ADDR (5)
O
CLK (5)
O
DATA (5)
I/O
SEG0
SEG39
SEG40/PORTN.0
SEG43/PORTN.3
SEG44/PORTM.0
SEG47/PORTM.3
SEG48/PORTL.0
SEG51/PORTL.3
SEG52/PORTK.0
SEG55/PORTK.3
O
Dedicated LCD segment output pads.
O/O
LCD segment output pads, and can be shared as general output by
register LCDM3 bit 1. Default function is segment pad.
O/I
LCD segment output pads, and can be shared as general input by
register LCDM3 bit 0. Default function is segment pad and PM5.1=0 to
inhibit LCD waveform abnormal.
O/O
LCD segment output pads, and can be shared as general output by
register LCDM2 bit 3. Default function is segment pad.
O/I
LCD segment output pads, and can be shared as general input by
register LCDM2 bit 2. Default function is segment pad and PM5.0 = 0 to
inhibit LCD waveform abnormal.
SEG56/PORTJ.0
SEG59/PORTJ.3
O/IO
LCD segment output pads, and can be shared as general input/output
by register LCDM2 bit 1. PM4 register is used to select input or output
while shared I/O function is active. Default function is segment pad and
PM4.3 = 0 to inhibit LCD waveform abnormal.
LCD segment output pads, and can be shared as general input/output
by register LCDM2 bit 0. PM4 register is used to select input or output
while shared I/O function is active. Default function is segment pad and
PM4.2 = 0 to inhibit LCD waveform abnormal.
SEG60/PORTI.0
SEG63/PORTI.3
O/IO