
W33D0001 SERIES
- 2 -
GENERAL DESCRIPTION
This chip is an LCD driver for a telephone dialer number display or other equipment. A maximum of
16 digits or 128 dots can be displayed, with 1/3 bias, 1/4 duty, and 32 segments.
In normal mode, a maximum of 128 dots (programmed by
μ
P transceiver function) can be displayed
on the LCD panel. In clock mode, the LCD panel can display a built-in clock that can also be
programmed through the
μ
P transceiver function. In timer mode, the LCD panel can display the
conversation time. The timer mode cannot be programmed by the
μ
P.
A V
DD
1 pin is used in different voltage system applications to implement a voltage level shift function
to guarantee the transceiver data.
This chip is fabricated using Winbond's high performance CMOS technology.
FEATURES
Supply voltage: 1.5V or 3V by mask option
Operating frequency: 32.768 KHz
Built-in crystal oscillator circuit
RC/Crystal mode selected by mask option
Voltage level shift with a
μ
P
Three operating modes
Normal mode (can be programmed by
μ
P)
Clock mode (can be programmed by
μ
P)
Timer mode. (can not be programmed by
μ
P)
Max. 16 (128 dots) digits with 8 dots/digit displayed in normal mode
LCD (128 dots) can be programmed by
μ
P from any address between 0 and 127
Clock display include leap-year, month, date, hour, and minute
Clock adjustable through MODE, SET pins or
μ
P
Conversation time max. 11 hours 59 min 59 sec
Clock 12 or 24 format by pin select
16, or 32 Hz LCD frequency select by mask option
1/3 bias, 1/4 duty 32-segment LCD panel
Built-in V
DD
1 for different voltage system data transceiver application
Built-in ATS pin to enable/disable timer mode
Packaged in 64-pin PQFP